ASTM at work on proposed lightweight aggregates standard

Words: Barbara Ambach/Public/News/20110926130000-1.jpg" width="600" height="338" border="0" alt="ASTM is developing a proposed standard, Specification for Lightweight Aggregate for Internal Curing of Concrete." />
ASTM is developing a proposed standard, Specification for Lightweight Aggregate for Internal Curing of Concrete.
While the use of internally cured concrete in construction is not new, there is now better understanding of the internal curing process and why IC using pre-wetted lightweight aggregate increases concrete durability and service life in an economical and practical way. However, there is not currently a standard for lightweight aggregates for internal curing.

ASTM International Committee C09 on Concrete and Concrete Aggregates is now developing such a proposed standard, ASTM WK34078, Specification for Lightweight Aggregate for Internal Curing of Concrete. The proposed standard is under the jurisdiction of Subcommittee C09.21 on Lightweight Aggregates and Concrete.

“Concrete, especially high performance concrete, is designed to limit the permeability and reduce chloride ingress,” says John Ries, technical director, Expanded Shale, Clay and Slate Institute, and a C09 member. “Unfortunately, these properties also limit the ability of externally applied curing water to reach the interior of the concrete. The main objective of internal curing is to provide a source of additional water to maintain saturation of the cementitious paste and avoid its self-desiccation.”

Ries says that internal curing can significantly increase the service life of concrete by increasing cement hydration, providing more complete reaction of supplementary cementitious materials and reducing chemical and drying shrinkage.

According to Ries, the proposed new standard will be useful in a variety of civil engineering projects, including roads, driveways, bridges, parking lots, water and sewage treatment tanks, and others. Users of the proposed standard will include the U.S. Federal Highway Administration, state departments of transportation, architects, and environmental, structural and civil engineers.

Interested parties are invited to join in the standards developing activities of C09. ASTM International welcomes and encourages participation in the development of its standards. For more information on becoming an ASTM member, visit www.astm.org/join.
PPE That Workers Actually Wear: Building Buy-In Through Education and Smart Selection
August 2026

In masonry construction, personal protective equipment (PPE) is often the last line of defense between a worker and an injury. Yet despite its importance, PPE compliance remains one of the most common challenges on jobsites across the country. The realit

Greg Brown
Safety Library
Read More
Zero Laydown: Navigating the Logistics of Tight Urban Job Sites
August 2026

In modern commercial construction, spatial real estate has become just as valuable as the materials themselves. The industry shift toward high-density, urban projects means that the sprawling job sites of the past have been replaced by tight footprints wh

Shayne Sanders
MAP Partner
Read More
Why "The Software Can't Track That" Is Finally Going Away
August 2026

For as long as specialty contractors have used field software, most of them have kept a workaround somewhere: a spreadsheet on a foreman's laptop, a whiteboard in the trailer, or a text thread where crew leads send block counts at the end of the day becau

Erin Koets
Build Smart
MAP Partner
Read More
Monadnock Building
August 2026

Chicago’s Monadnock Building doesn’t dominate the skyline the way it once did. Surrounded by steel-and-glass towers, the dark brick structure can seem almost understated. But for anyone in the masonry industry, it remains one of the most important buildin

Cass Stern
American Treasure
Brick Clay Brick
Read More
Interested in working with us? Learn about and join the Masonry Alliance Program →