Cedar Park, Texas to require more masonry in construction

Words: Rudy Garza/Public/News/20120812070000-1.jpg" width="600" height="338" border="0" alt="The Cedar Park City Council has voted to raise minimum masonry requirements." />
The Cedar Park City Council has voted to raise minimum masonry requirements.
Cedar Park, TX, has adopted standards for new construction, which officials hope will better protect its citizens and the tax base, according to the Texas Masonry Council.

The Cedar Park City Council has voted to raise minimum masonry requirements for new industrial and commercial buildings and for some new residential units. The Council voted 5-1 in favor of the new masonry standards.

The masonry standards for new construction are:


  • Commercial — raised from the present 25, 50, and 75 percent to 100 percent masonry exteriors for all types of commercial buildings;

  • Industrial — raised from the present 25 percent to 50 percent for all such buildings;

  • Residential — units that face two roads, such as on corner lots, minimum raised from 50 percent to 75 percent masonry exteriors; other residential units continue to have 50 percent minimum requirement;

  • Multi-Family — raised from 50 percent to 100 percent masonry;

  • Townhomes and Condominiums — raised from 50 percent to 75 percent masonry;

  • Institutional — minimum increased from present 50 percent masonry exterior to 100 percent.



Located in the Texas Hill Country just northwest of Austin, in fast-growing Williamson County, Cedar Park is the third largest city in the Austin metropolitan area.

Mayor Bob Lemon cited safety, rather than aesthetics as the primary reason for higher masonry requirements, noting the greater protection that masonry provides from fires and windstorms.

Research has shown that masonry (brick, stone, concrete block) provides greater protection against fire, and windstorms, such as tornadoes and hurricanes, than non-masonry siding products.

Council member Mitch Fuller, who cast the only dissenting vote, wanted even stronger residential construction standards — 75 percent minimum for all new residential units, not just some.

A University of Michigan study of masonry ordinances in four Illinois towns concluded that such ordinances result in: 1) higher overall property values; 2) growth in the tax base, lessening the tax burden on residents; 3) continued population and housing growth, and 4) no significant impact on affordability for either renters or buyers of housing.

Rudy Garza, executive vice president of the Texas Masonry Council, said, “Texas has a rich history of building with long-lasting masonry products. Masonry is part of the Texas heritage, and by embracing masonry planning, local officials and civic leaders, such as those in Cedar Park, are helping to build a strong legacy for their communities.“

Cedar Park is one of a growing list of more than 150 Texas cities that have incorporated exterior masonry construction requirements into community planning, according to the Texas Masonry Council.
Is Contact with Wet Mortar or Grout Dangerous?
April 2026

In the world of masonry, few materials are as common as mortar and grout. Whether you are laying brick, concrete masonry units (CMU), or pouring grout into masonry walls, wet cement and mortar are constant companions. However, beneath their utility lies a

The Importance of Instructor Support
April 2026

Whether you are a new or veteran masonry instructor, we all need support throughout our careers. We can never stop learning, and keeping up with ever-changing technology, materials, and installation techniques can be overwhelming alongside the everyday pr

Vibing Masonry #11: Innovative Concrete Masonry Technologies in Healthcare Design
April 2026

In the high-stakes environment of healthcare design, every material choice is a clinical decision. Architects, engineers, and facility administrators are tasked with creating spaces that are not only resilient and code-compliant but also conducive to heal

Why Termination Bars Still Matter: A Practical Look at Long‑Term Flashing Performance
April 2026

In recent discussions across the masonry industry, I have heard termination bars described as “old school.” The implication is that with modern materials, primerless peel-and-stick flashings, advanced sealants, and structural insulated sheathing, mechanic