MIA CEU Course Teaches Stone Specification

Words: Jim CookChoosing the right stone for a project is more difficult than it sounds. Architects and designers must weigh a number of factors, including functionality, durability and availability, when selecting stone for construction projects. New training opportunities offered by the Marble Institute of America are aimed at helping designers and architects better understand natural stone and how to select the right material for the job.

The Marble Institute of America (MIA) has launched a new continuing education program, “The Art of Specifying Natural Stone.” The program is a one-hour session that will teach architects and designers how to specify natural stone. The course will also be available through certified MIA CEU providers throughout the year.

“This course was developed because CEU (continuing education unit) program attendees have expressed a strong interest in a course about specifying natural stone,” says Sarah Gregg, CEU administrator for the MIA. “This new course will answer some of the most common questions about specifying and help participants better understand the topic.”

Stone suitability will be a major focus of the seminar. Participants will learn about the three species of stone: sedimentary, igneous and metamorphic. They will also learn about stone types: calcareous or siliceous. Stone species and type have a huge impact on whether stone is suitable for certain uses.

Consider these facts about different stone types and their best uses in construction:
  • Granites and basalts — These forms of stone work well for just about any indoor or outdoor application. Granites and basalts are igneous, siliceous forms of stone.
  • Sandstone — A sedimentary, siliceous form of stone, sandstone works well for most indoor and outdoor applications. Laborers must pay careful attention when mechanically anchoring this variety of stone, however.
  • Limestone and travertine — Both sedimentary and calcareous stone varieties, limestone and travertine work well for several outdoor and indoor applications. They may also work well for countertops, but do not always do well in kitchens.
  • Marble — A metamorphic, calcareous form of stone, marble works quite well in interior applications and for some countertops, excluding food preparation areas. Outside use is more difficult and should be evaluated on a case-by-case basis.
  • Slate, quartzite, serpentine, soapstone — These are metamorphic, siliceous stone varieties.
In general, they work well in a limited number of outdoor and indoor applications and are great for countertops.

Lecturers will address stone color, explaining how certain colors work better than others for particular applications. For example, darker color stone may be more suitable for floors as it is less likely to show dirt and stain easily.

“Architects and designers must have an understanding of the properties of stone, as well as its availability, durability and maintenance requirements,” Gregg says. “If they specify a stone that will not perform well in a particular setting that can lead to long term problems and shorten the lifespan of the project.”

Lecturers also will address the responsibility of each pillar in the typical construction project involving stone. Design professionals must select stone that will be the best fit for its application, from both an aesthetic and economic standpoint. Material suppliers must obtain stone that meets or exceeds the performance parameters of the intended application. Installing contractors are responsible for providing skilled labor to properly install the stone.

The end user of the facility needs to provide architects and designers with realistic requirements for the project and commit to proper maintenance once the project is complete. The session will also address some economic factors influencing stone selection. Attendees will learn to consider factors such as the proximity of quarries producing desired stone, the output of these quarries and their ease of access to transportation routes when making stone selections.

Lecturers will also address labor and logistics, explaining what stone types and finishes are more labor intensive than others and teaching attendees how to factor these considerations into their decisions. Gregg says demand by architects and designers led to the creation of the “The Art of Specifying Natural Stone” program.

“CEU program participants fill out an evaluation form at the end of each course,” Gregg says. “When reviewing these forms, MIA noticed that many participants specifically said that they would benefit from a course focused on specifying natural stone. This shows there was a need for a course on the subject.”

The MIA provides continuing education programs for architects, interior designers, kitchen and bath professionals and landscape architects that are recognized by dozens of professional organizations, including the American Institute of Architects, Interior Design Continuing Education Council, Landscape Architecture Continuing Education System, National Kitchen and Bath Association and more. The programs are valuable to firms, as it saves them from having to develop and implement their own continuing education programs. More than 2,000 architects and design professionals have participated in MIA continuing education courses this year.

To learn more, visit www.marble-institute.com/CEU.
About: Educational (University)Featured
Who Knows Most About Keeping Masonry Workers Safe?

As a safety professional who has specialized largely in masonry safety since the late 1980s, I’ve grown to think that I know a great deal about keeping masonry workers safe. That being said, I must admit that my colleagues and I know more about complianc

Read More
Recognizing Women in the Industry

Masonry was introduced to the world through the imagination, determination, and pure strength of mankind. The first masons’ unique abilities harnessed the earth around them to create the structures that provided the security that allowed us to advance. Th

By: Cassie Mejia
Read More
Understanding Different Types of Trowels Originating Through Government Specifications

Trowels are essential tools in masonry, each one designed with specific functions and specifications to aid in various tasks. Knowing the right type of trowel to use can greatly impact the quality and efficiency of your work. This article dives into the f

By: Paul Bender
About: MAP Partner
Read More
Natural Stone Institute Holds Utah Study Tour

Oberlin, OH, September 17, 2024—157 attendees from 48 member companies and 5 architectural firms attended the annual NSI Study Tour, which took place in Salt Lake City August 25-28, with an optional extension to Idaho on August 29. Highlights included an

By: Amy Oakley
Read More
Interested in working with us? Learn about and join the Masonry Alliance Program →