MCAA Regional Report, Region G

Words: Glenn HottmannArizona - Clemens Hellmann
Colorado - No State Chair
New Mexico - No State Chair
Utah - Alan Johnson
Wyoming - Jim Thompson

Workforce Development

Arizona

The 2013 Apprenticeship school year officially kicked of in early January. Enrollment numbers for both programs have increased in 2013. In 2012, the Central & Southern Apprenticeship Program each had 5 apprentices enrolled. These numbers have increased to 8 apprentices for the Central Program and 9 apprentices for the Southern Program.

In 2012 AMCA began the lay the ground to implement the NCCER program based on the Florida Masonry & Apprenticeship Education Foundation’s program. In 2013, AMCA will continue to work towards implementing the program in local high schools across the state.

Colorado

No State Chairman

New Mexico

No State Chairman

Utah

No report as of this writing.

Wyoming

No report as of this writing.

General Conditions

Arizona

In 2012, AMCA continued to move forward with many of its programs despite the challenging economic conditions. In 2012, AMCA’s Safety Committee held 2 different scaffold training courses. With the great sponsorship support of Western Block & SPEC MIX, AMCA held the 2012 AZ Masonry Expo which included the Masonry Skills Challenge for apprentices and the Toughest Tender & Fastest Trowel Competition. This event was a huge success with over 450 spectators!

Colorado

No State Chairman

New Mexico

No State Chairman

Utah

Utah was ranked as the #1 state to do business in by Forbes magazine in 2012. Last year, Utah had the 5th fastest growth in population in the U.S. and was ranked the 5th in the lowest unemployment in the country. All these items add up to a growing economy that is much higher the most parts of the nation. Utah has been attracting a significant amount of hi-tech companies and the growth is expected to continue at a very high rate in attracting these types of businesses to Utah.

Wyoming

No report as of this writing.

Economic Conditions

Arizona

To 2012 proved to still be very challenging for our industry and many of our members although the year did end with signs of slight improvement in the market conditions. As we move into 2013, many production homebuilders are slowly beginning to development new communities. As a result, our residential masonry fence contractors are seeing an increase in business but are now faced with a shortage of skilled masonry labor workforce. The Commercial market is still very slow but we are anticipating a slight improvement in 2013.

Public works project slightly decreased in 2012 but we anticipate a slight uptick in public projects moving into 2013.

Many material suppliers announced price increases to take effect in early 2013. As a result, we are anticipating the overall prices for masonry materials to increase this year.

Colorado

No State Chairman

New Mexico

No State Chairman

Utah

Local architects and engineers are busy and a reasonably good outlook for construction is expected in 2013. Mason contractors who have survived to this point are still bidding very conservatively continuing to put pressure on profit margins.

There has been a challenge in stopping labor leasing companies that setup operations in Utah who try to skirt the law by leasing employees as independent contractors. This has impacted a lot of legitimate contractors including mason contractors as many unethical contractors used these services to lower their cost of doing business. Significant progress has been made in getting legislation passed to take out these leasing companies and penalize the businesses who are using these services as they are wrongly classifying employees for their personal financial gain.

Wyoming

No report as of this writing.

Market Expansion & Initiatives

Arizona

In 2012, AMCA and the Arizona Masonry Guild (AMG) partnered to introduce several programs to promote the use of masonry products. A central part of this initiative was a “lunch & learn” series program centered on the thermal performance of concrete masonry wall systems. The lunch & learn proved to be very successful and AMCA & AMG have agreed to continue with this program in 2013. With the assistance of our industry lobbyist, AMCA & AMG were able to meet & beginning developing relationships with key legislative/political officials.

Colorado

No State Chairman

New Mexico

No State Chairman

Utah

The Utah Masonry Council with the direction of their board, have pursued working with various cities in Utah, to assist them in analyzing their current building codes and educating them on the long term value and aesthetically pleasing looks if they will strengthen their requirements for building exteriors. They have had continued success in that area.

And finally, after missing a year for lack of significant work to nominate, the Utah Masonry Council is holding their Excellence in Masonry Design awards on January 25th to honor the architects who have designed buildings with a strong emphasis on masonry.

Wyoming

No report as of this writing.
Chairman’s Message: When Things Don’t Go as Planned
June 2026

Not every day in this business goes the way we planned. Some days, everything lines up. The crew is moving well. Materials are on time. The job is flowing the way you hoped it would. And then there are the other days. The ones where something breaks. T

Fechino Files: Trust Your Subs, Just Document!
June 2026

When I was working for a large masonry contractor, we typically performed masonry work with our own employees. When we would construct large Segmental Retaining Walls, often we would require a subcontractor who had larger equipment for different portions

Marvelous Masonry: Borobudur
June 2026

For masonry contractors and suppliers, few structures offer as much practical insight as Borobudur. Built in the 9th century in Central Java, this massive stone monument remains as one of the most advanced examples of large-scale masonry construction ever

Wrapping Up Our Year And A Look Ahead
June 2026

It is amazing another year has gone by and what a year it has been. We have seen a lot of progress on so many fronts. All of this happens specifically due to the support of our members. Your support this past year is positioning our industry to make huge