Construction Industry Safety Coalition urges U.S. Department of Labor to withdraw “significantly flawed” silica proposal

Words: Jeff BuczkiewiczThe Construction Industry Safety Coalition, which represents twenty-five different construction trade associations, issued the following statement as it filed comments regarding the Occupational Safety and Health Administration’s (OSHA) proposed Crystalline Silica Rulemaking:

“After an exhaustive analysis that involved hundreds of construction safety professionals, builders, construction managers and specialty trade contractors representing virtually every facet on the industry, it is our conclusion that the administration’s proposed new silica rule is significantly flawed and will do little to improve workplace health or safety. Specifically, the proposed rule sets a silica exposure standard that cannot be accurately measured or protected against with existing equipment and includes a series of data errors that undermine many of the rule’s basic assumptions.

“The proposed rule’s new silica exposure limit is virtually impossible to accurately measure or protect against using existing technology. For example, commercially-available dust collection technology is not capable by itself of protecting workers from the rule’s new silica exposure limit. A limitation the agency appears to acknowledge in its additional requirement that workers also wear respirators, something that would not be necessary if the dust collection technology was effective.

“Even more troubling, the proposal is rife with errors and inaccurate data that call into question the entire rulemaking process. Agency officials, for example, omitted 1.5 million construction workers from its assessment of the size of the affected workforce. The agency also did not consider the broad range of tasks and variety of settings and environments in which construction occurs. And the agency’s assessment of the rule’s cost was off by a factor of four.

“Given the lack of scientific explanation justifying the new exposure limits, the many contradictions between the rule and the realities faced in the construction industry, and the fact that agency officials made significant errors in the basic data the rule is based on, we are urging the administration to withdraw this proposed rule. We strongly urge agency officials to work with us and employee groups to craft a silica measure that will build upon the work all of us have done to reduce silica-related deaths by 93 percent during the past three decades.”

About the Construction Industry Safety Coalition

The CISC is made up of 25 trade associations, representing associations from all sectors of the construction industry, including commercial building, heavy industrial production, home building, road repair, specialty trade contractors and material suppliers. Workplace safety and health is a priority for all members of the coalition, and each is committed to helping create safer construction jobsites for workers.
  • American Road and Transportation Builders Association
  • American Society of Concrete Contractors
  • American Subcontractors Association
  • Associated Builders and Contractors
  • Associated General Contractors
  • Association of the Wall and Ceiling Industry
  • Building Stone Institute
  • Concrete Sawing & Drilling Association
  • Construction & Demolition Recycling Association
  • Distribution Contractors Association
  • Interlocking Concrete Pavement Institute
  • International Council of Employers of Bricklayers and Allied Craftworkers
  • Leading Builders of America
  • Marble Institute of America
  • Mason Contractors Association of America
  • Mechanical Contractors Association of America
  • National Association of Home Builders
  • National Association of the Remodeling Industry
  • National Demolition Association
  • National Electrical Contractors Association
  • National Roofing Contractors Association
  • National Utility Contractors Association
  • Natural Stone Council
  • The Association of Union Constructors
  • Tile Roofing Institute
About: FeaturedLegislative
Recognizing Women in the Industry

Masonry was introduced to the world through the imagination, determination, and pure strength of mankind. The first masons’ unique abilities harnessed the earth around them to create the structures that provided the security that allowed us to advance. Th

By: Cassie Mejia
Read More
Understanding Different Types of Trowels Originating Through Government Specifications

Trowels are essential tools in masonry, each one designed with specific functions and specifications to aid in various tasks. Knowing the right type of trowel to use can greatly impact the quality and efficiency of your work. This article dives into the f

By: Paul Bender
About: MAP Partner
Read More
Natural Stone Institute Holds Utah Study Tour

Oberlin, OH, September 17, 2024—157 attendees from 48 member companies and 5 architectural firms attended the annual NSI Study Tour, which took place in Salt Lake City August 25-28, with an optional extension to Idaho on August 29. Highlights included an

By: Amy Oakley
Read More
LAR 300 Rotary Laser – Rugged, Precise, and Efficient Horizontal Leveling Made Easy

STABILA’s reputation for high-end measuring products and German engineering shines through in the LAR 300 Rotary Laser. This laser combines simple functionality with high precision across large distances and unmatched durability. Key Features Precision an

By: Jeffrey Beck
About: MAP Partner
Read More
Interested in working with us? Learn about and join the Masonry Alliance Program →