MASONRY x DESIGN: The Whole Building Process

Words: Bronzella Cleveland

MASONRY x DESIGN: The Whole Building Process

Dan Kamys, Editorial Director - dkamys@masonrymagazine.com

Bronzella and I don’t usually both write an Editorial Note in each issue of MASONRY, but this month I wanted to introduce an exciting new edition of our magazines that you’ll see in the coming year. They’re called MASONRY x DESIGN, there will be two issues in June and September, and the best way to think about them is as a combination between a regular issue of MASONRY and a regular issue of MASONRY DESIGN.   There are a lot of reasons it made sense to us to join the forces of the two magazines. This will truly be the first time we have architects, designers, engineers, design students, and software manufacturers contributing content for the same magazine as mason contractors, project managers, equipment suppliers, and field safety experts. Our goal is to truly show the whole process of construction all the way from inception to the finished project.   Increasingly, what Bronzella and I have learned throughout our work on the magazines, is that there are similarities on both sides. Material selection, managing teams, utilizing the latest software and technology, and a multi-generational workforce are all challenges everyone is facing right now.   These two special editions will distribute to the over 35,000 readers who regularly receive MASONRY and/or MASONRY DESIGN. This national distribution spans the entire masonry design and construction community. It’s a first, and we’re excited at the potential it brings to inform the overall community.   Our first issue will be in June 2019, and our second will be in September 2019. If you’re subscribed to either MASONRY or MASONRY DESIGN, you don’t have to do anything special to receive the copies.   We look forward to putting together these showpieces and would love to hear your suggestions in advance or feedback once the issues come out.       dsig
Five Truths About Final Brick Cleandown
May 2026

Not all truths are self-evident. Sometimes they’re easy to forget or clouded with misunderstanding. The good news is these truths of final cleandown are not hard to implement on your next project to ensure successfully cleaned and beautiful new brick.

Jake Boyer
MAP Partner
Read More
Shelf Angles and Their Impact on Wall Performance
May 2026

Shelf angles have long been a standard component in masonry construction. Installed at the slab edge, they provide support for brick veneer and are often treated as a routine detail. However, as building performance requirements evolve, particularly aroun

Erica Oliveraz
MAP Partner
Read More
The Mason’s Mark: Defining the Craft Through the Trowel
May 2026

Walk onto any job site, from a custom residential chimney to a sprawling commercial block wall, and you will hear it before you see it: the distinctive ring of high-carbon steel striking masonry. The trowel is more than just a mortar scoop; it is the cond

Mark Maleski
Technical Talks
Read More
Registration Now Open for the 2026 MCAA Midyear Meeting in San Antonio, Texas
May 2026

The Mason Contractors Association of America (MCAA) is thrilled to announce that registration is now open for the highly anticipated 2026 MCAA Midyear Meeting, set to take place in San Antonio, Texas. This exciting event is scheduled from September 13th-1

Industry News
Read More
Interested in working with us? Learn about and join the Masonry Alliance Program →